How to properly install your carbon fiber wheels

Installing carbon fiber wheels requires special tips and precautions to ensure they perform at their best and avoid potential damage. Here are some key points to consider when installing carbon fiber wheels.

1.Check the compatibility of the wheel and frame

Before installing, first, confirm whether your frame supports carbon fiber wheels, and check whether the wheel size, wheelbase, and other parameters match the frame. If they do not match, it may cause installation difficulties or damage the frame during installation.

2. Choose the right tools and accessories

The installation process of carbon fiber wheels requires special care to avoid damaging the rim or bearings due to the use of improper tools. During the installation process, use special tools, such as brake pads and bearing tools specifically for carbon fiber. At the same time, make sure that the installation screws, axles, and other accessories meet the requirements and maintain the appropriate torque.

3. Be careful to prevent over-tightening during installation
Carbon fiber wheels are more delicate than aluminum alloy wheels, so special care needs to be taken during installation to avoid over-tightening the axle or brake system screws. Excessive tightening force will cause unnecessary stress on the carbon fiber rim, thus affecting its structural stability. It is recommended to use a professional torque wrench to ensure that the tightening force of each component meets the recommended standards.

4. Check the centering of the wheelset
After installing the carbon fiber wheelset, make sure that the wheel is aligned and there is no deviation. Wheel misalignment will cause unnecessary resistance when riding and even affect the normal operation of the brake system. If you are not sure whether the installation is aligned, you can ask a professional technician to help adjust it.

5. Regular inspection and maintenance

After installing the carbon fiber wheelset, check the condition of the wheel regularly to ensure that there is no looseness or wear. In particular, the brake band and carbon fiber surface need to be kept clean to ensure the best braking effect.